Oil Extract Centrifuges Plant Oil Wash and Dry Extraction Separator Centrifuge Extractor explosion-proof | DOVMXTECH

Centrifuge, also called Centrifugal extractor, used for low-temperature extraction of hemp or other plant cytoplasm, with the function of spin-dry the extraction liquid.

DOVMXtech PSB PB centrifuge is specially optimized for ethanol extraction of hemp oil or plant essential oil.

Cannabinol soak extraction centrifuge uses special structure for dehydration; During soaking, the solid will move and mix at a low speed in the rotating drum, so that hemp biomass can be fully immersed in the soaking solution, and can be fully reacted and extracted in the rotating drum. Each jacketed centrifuge is equipped with explosion-proof motor. It is mainly applicable to the soak and extraction of hemp Biomass. The soak solution is ethanol, the soak temperature is - 40 ℃ to - 60 ℃, and the machine shell is double-layer, which is mainly used to extract cannabinol; Cannabis soak extraction centrifuge is a closed and intermittently operated filtering equipment with upper discharge.

Put the hemp biomass into the filter bag and put them into the rotary drum, then inject ethanol for soaking. When soaking, rotate forward and reverse at low speed. After extraction, under the action of centrifugal force field, the liquid phase passes through the filter medium and is discharged out of the machine, and the solid phase is trapped in the filter bag, with the water content less than or equal to 5%. After shutdown, open the machine cover and take out the filter bag.

DOVMXtech Centrifuge Extractor:

Features:

1. Encapsulate the motor and drive components to ensure safe operation.
2. Advanced control system and PLC and touch screen realize single operation.
3. Imported brand explosion-proof motor with higher rotational speed and higher extraction rate.
4. Reasonable sealing structure design can realize reliable sealing of bearing.
5. The drum is made of 304 stainless steel, and other structures are wrapped with 304 stainless steel. The plate is thickened, and the internal and external surfaces are polished with mirrors, meeting the GMP cleaning standard. It is durable and rust-free.
6. The center of gravity of the machine is low and the operation is stable. Easy installation.
7. Jacket insulation, Optimize the design to allow temperature extraction of - 60 ℃, can be connected to a circulating refrigerator, so that the reaction temperature is controlled at the best state. The insulation sleeve can also be customized as required.
8. The flat-type large lid closed structure has good sealing performance, is not easy to produce ethanol steam, and is high in safety. It can be connected with vacuum pump according to demand.
9. The diameter of feed pipe, discharge pipe and washing pipe shall be made according to the requirements, and the sight glass, explosion-proof lamp, vacuum gauge and thermometer can be equipped according to the requirements.
10. Equipped with spring damping damper to reduce vibration and noise.
11. Equipped with variable frequency control box, PLC programming control, touch screen operation, adjustable speed and running time.
12. Three filter bags are provided.
13. The delivery period is 20 days. The warranty is one year.

Design and manufacture of main components of centrifuge:

1. Connecting structure of casing, base and cover:

The machine cover and body are opened with spring power, which can facilitate cleaning and replacement of the drum. The connection with the flange of the machine body is sealed with silicone rubber strips, so that the machine will not leak during operation.

2: Lid parts:

A. The flip lid is equipped with DN25 feed pipe, DN25 vacuum pipe and 2 plane mirrors.

B. The lid body is made of 3mm thick stainless steel plate.

C. Tempered glass machine cover lid (Optional).

3: Base parts:

A. Flat plate structure, the main board is directly made of 30mm A3 plate, and the surface is lined with 2mm stainless steel plate. The flat plate can reduce the center of gravity of the machine and operate smoothly.

B. The shell barrel is double-layer and can be cooled by circulating liquid nitrogen. The flat plate and shell are fixed welded. The liquid flowing through the flat plate is made of 304 stainless steel.

C. Damping vibration isolators are used on the base plane and the ground plane to ensure uniform stress on the equipment and achieve good shock absorption effect.

4: Drum parts:

A. Inner liner production: the material is 6mm thick 304 stainless steel.

B. The drum bottom is made of 304 stainless steel plate in one piece.

C. The rotary drum is welded and processed as a whole for dynamic balancing.

5: Transmission components:

A. The structure of independent bearing block is adopted, which can be easily disassembled and repaired.

The body is welded and finished, and its steel toughness is good.

B. The bearings are imported bearings and imported fluororubber skeleton oil seals are used.

C. The main shaft is made of 40cr material precision machining.

D. The transmission seal is gas seal. When the equipment is soaked in materials, the gas pump continuously inflates the equipment transmission and the drum to prevent the liquid from entering the transmission chamber, ensure that the bearing is not corroded by the liquid, and ensure the normal operation of the equipment.

Design, safety and production cycle of centrifuge frequency conversion system:

1. Composition of main control box:

A. The main control cabinet mainly includes: frequency converter, brake unit, brake resistor and other components, equipped with touch screen, manual start and stop button, the equipment rotating drum can realize forward and reverse transfer, and PLC program control.

B. Explosion-proof motor, imported motor, higher speed.

2. Centrifuge safety protection:

A. Motor overload and overheating protection.

B. Real-time detection of centrifuge rotation speed (in case of large vibration of centrifuge during operation, the equipment shall be immediately stopped).

3. It is manufactured in strict accordance with GB/T13755-92 conditions, GB/13756 parameters and GB/19815-2005 safety requirements.

Centrifuge detection means and methods:

1. "X" radiographic inspection of drum body.

2. The overall dynamic balance of the drum is corrected.

3. Quenching and tempering treatment and magnetic particle flaw detection treatment of main shaft.

Normal operation conditions of centrifuge:

1. Main power: 3-phase; Voltage: 220V

2. Operating environment of the equipment: the ambient temperature is 0 ℃~80 ℃, and the relative humidity of the air is not more than 85%;

the filter bag: Polypropylene PP centrifuge bag, chemical resistant, zipper, 10 microns.

Packing list:

1. Centrifuge host 1 set

2. 1 frequency conversion electric control cabinet

3. Centrifuge operating instructions;

4. Operation manual of frequency converter;

5. Electrical wiring diagram;

6. Equipment quality inspection report;

after-sale service:

1. After customizing the equipment, provide structural drawings to guide the installation.

2. The whole machine is guaranteed for one year, and parts are provided at the cost.

Note: When ordering, users should determine the specific configuration (material, online cleaning, explosion-proof requirements, nitrogen protection, surface treatment requirements, brand of electrical components, control mode) according to the actual process requirements to meet the technical and economic requirements.

Note:

Explosion-proof electrical control cabinet: additional $1500.

For more types and detailed product configuration, or customization as required, please contact us by email: info@dovmxtech.com

Daily maintenance of centrifuge

1. Before the centrifuge runs, cut off the power supply and release the centrifuge brake first, and then try to turn the drum manually.

2. Check other parts for looseness and abnormality.

3. Turn on the power supply and start in clockwise direction (usually it takes about 40-60 seconds from static state to normal operation).

4. Generally, each equipment must operate for about 3 hours without any abnormality after arriving at the plant.

5. The materials should be placed evenly as far as possible.

6. The operation shall be carried out by specially-assigned person, and the capacity shall not exceed the rated quantity.

7. It is forbidden to overspeed the machine to avoid affecting its service life.

8. After the machine is started, if there is any abnormality, it should be stopped for inspection, and it should be disassembled, washed and repaired.

9. The centrifuge operates at high speed, so it is not allowed to touch the drum with your body to prevent accidents.

10. The mesh number of the filter cloth should be determined according to the size of the solid particles of the separated material, otherwise the separation effect will be affected.

11. In addition, the filter cloth and sealing ring shall be embedded into the sealing groove of the drum during the installation of the filter cloth.

12. In order to ensure the normal operation of the centrifuge, please refuel and maintain the rotating parts every 6 months.

13. At the same time, check the running lubrication of the bearing for wear.

14. Check whether the components in the brake device are worn, and replace them if they are serious, and check whether the bearing cover has oil leakage.

15. After the machine is used, clean it and keep it clean.

16. In addition, operate in strict accordance with equipment requirements and regulations. Non-explosion-proof centrifuges must not be used in flammable and explosive situations.

------