10L glass reactor in stock

Glass reactors are used for experiments, pilot tests and production of chemistry, fine chemicals, biopharmaceutical and new material synthesis. The product can be matched with circulating water multi-purpose vacuum pump, diaphragm vacuum pump, low-temperature circulation (vacuum) pump, circulation cooler, constant temperature circulator, low-temperature coolant circulation pump, closed refrigeration and heating circulation device, etc. to form a system device.

Ten liter glass reactor is divided into single layer glass reactor DOVMX SGR-10L, Double layer glass reactor DOVMX DGR-10L, Three layer glass reactor DOVMX TGR-10L.

Speed-regulation glass reactors are mainly used for synthetic reaction, distillation and concentration of different types of materials.

DOVMXtech Glass Reactor:

The speed regulating glass reactor is mainly used for material synthesis, distillation, concentration and other experiments. The structure of the kettle can be divided into three types: single layer, double layer and three layers. The kettle can be pumped to a negative pressure state as required to meet the experimental conditions. By adjusting the constant pressure funnel or the regulating valve on the feeding bottle, the material can be uniformly added. The reaction product is recovered by distillation using the heat exchange function of the condenser.

The kettle body of the double-layer speed regulating glass reactor has inner and outer layers. The temperature of the materials in the kettle is adjusted by injecting a certain temperature of circulating liquid into the interlayer. The inner container of the double-layer glass reactor is used to place the reaction materials. At the same time, the vacuum can be evacuated and the speed can be adjusted for stirring. The interlayer can introduce freezing liquid, water and high-temperature liquid to heat and cool the materials.

The three-layer speed regulating glass reactor has two layers of glass jackets. The inner jacket is used to pass the circulating liquid with a certain temperature to adjust the temperature of materials in the kettle. The outer jacket is pumped to a vacuum state by a vacuum pump to realize the insulation function.

Product technical characteristics

● all glass components are high borosilicate glass 3.3 with good physical and chemical properties.

● it can be used in the range of high temperature (200 ℃) to low temperature (- 80 ℃).

● it can work under normal pressure and negative pressure, and the vacuum degree can reach 0.095mpa.

● allowable pressure range in the kettle: - 0.1MPa ~ 0mpa.

● anti corrosion discharge valve designed for discharge at the side without liquid accumulation.

● the main frame is made of SUS304 with strong corrosion resistance.

● SUS304 material tray to prevent environmental pollution.

● three phase asynchronous mixing motor, variable frequency speed regulation, digital display of mixing speed.

● the mixing bearing can prevent the mixing rod from abrasion and chip dropping, with good sealing effect and long service life.

● PT100 temperature sensor is adopted, with high temperature control accuracy. SUS304 material is coated with polytetrafluoroethylene tube and double anti-corrosion.

● paddle type mixing paddle, polytetrafluoroethylene mixing blade; The mixing rod is made of SUS304 and wrapped with polytetrafluoroethylene, with high strength and strong corrosion resistance.

● plug or discharge valve made of Teflon + FV rubber; "O" ring with tetrafluoroethylene protective layer.

● equipped with casters, easy to move.

● compact structure and space saving.

● the height of the discharge valve is appropriate for discharging.

● Explosion-proof: additional $250.

Specific parameters of double-layer glass reactor SGR212-10L

single layer glass reactor DOVMX SGR-10L Technical Data

Double layer glass reactor Jacketed Glass Reactor DOVMX DGR-10L Technical Data

DOVMX single/dual jacketed glass reactors are designed for synthetic reaction of different types of materials in a controlled temperature and vacuum environment. Each reactor features adjustable stirring speeds and a constant pressure feeding funnel that allows you to add material to the vessel at a uniform and controlled speed. The built-in condenser makes it possible to recover some materials, also at a controlled rate of speed.

Features

• ETL tested to UL and CSA standards (optional)
• Now includes a FREE high quality thermo insulation jacket (a $399 value) with open/close viewing window and top/bottom adjustable drawstrings, specially designed and made for DOVMX glass jacketed reactors. These jackets will extend chiller life, allow you to go down to a lower temperature, and also cut your utility bill.
• Dual jacketed model allows you to draw vacuum from the outer jacket, thus protects your recirculating fluid temperature and gives you best control over your work. It also help prevents frost to form on the outside of the vessel, allowing you to see clearly into your material.
  
• Solvent-resistant PTFE on all sealing components ensures long time durability and operation.
• All glassware is hand-made from food grade high borosilicate glass that is heat/cold/corrosion-resistant.
• Adjustable stirring rate provides great torque or high speed.
• Patented PTFE stirring rod bearing for reliable and quiet operation.
• Optional multi-layer stirring blades for optimal reaction results.
• Wide range of temperature operations, from -110F to 400F.
• Large condenser cooling surface for exceptional condensation performance.
• Rugged stainless steel reinforced PTFE stirrer with anchored agitator, suitable for a wide range of viscous materials.
• Easily visual operation with digital speed and temperature displays.
• Heavy duty stainless steel supporting framework with lockable casters for mobility and stability. (whole support and glass vessel shipped pre-assembled)
• One year warranty and lifetime service, and support.

Your safety is important to us! Please use caution when operating. Users of glass reaction equipment must take all necessary precautions to avoid contact with rotating parts, particularly entanglement of loose clothing, hair, necklaces, or other jewelry. Under these circumstances, the winding action of the rotating parts can draw the user(s) into the apparatus, resulting in breakage of glassware, burns, and/or chemical exposure. Extra caution must also be taken when operating with air-reactive materials, especially under vacuum. A leak can draw air into the apparatus and cause a violent reaction to occur.

Three layer glass reactor DOVMX TGR-10L Technical Data

Precautions for operation:

1. Add materials into the kettle through solid feeding or other feeding ports.

2. Vacuum the reaction kettle according to the reaction needs. The three-layer reactor can use a vacuum pump to vacuum the outermost jacket to form a vacuum state, so as to realize the insulation function and avoid the loss of cooling capacity.

3. Adjust the temperature control equipment according to the displayed temperature to make the kettle reach the required reaction temperature.

4. Slowly adjust the knob to the required speed.

5. After the reaction is completed, turn off the temperature control equipment first, and then turn off the power supply of the reactor.

note: the circulating valve cannot be closed.

6. Open the discharge valve to discharge the materials. The valve parts or the kettle can be cleaned as required and re installed firmly.

If the glass parts are to be cleaned, they must be restored to normal temperature. After cleaning, wipe the water beads inside and outside to avoid cracking of the kettle due to uneven temperature or sudden temperature change.

常见故障分析及排除                                                    

Operation:

1. Add materials into the kettle through solid feeding or other feeding ports.

2. Vacuum the reaction kettle according to the reaction needs. The three-layer reactor can use a vacuum pump to vacuum the outermost jacket to form a vacuum state, so as to realize the insulation function and avoid the loss of cooling capacity.

3. Adjust the temperature control equipment according to the displayed temperature to make the kettle reach the required reaction temperature.

4. Slowly adjust the knob to the required speed.

5. After the reaction is completed, turn off the temperature control equipment first, and then turn off the power supply of the reactor.

note: the circulating valve cannot be closed.

6. Open the discharge valve to discharge the materials. The valve parts or the kettle can be cleaned as required and re installed firmly.

If the glass parts are to be cleaned, they must be restored to normal temperature. After cleaning, wipe the water beads inside and outside to avoid cracking of the kettle due to uneven temperature or sudden temperature change.

------