DOVMXTECH Stainless steel reactor is a new type of reaction equipment developed on the basis of absorbing domestic and foreign advanced technology. It has the characteristics of rapid heating, hightemperature resistance, corrosion resistance, hygienic, no environmental pollution, no need for automatic heating of boiler, easy to use and so on. It 's used in petroleum, chemical, rubber, pesticide, dyes, medicine, food, Also it 's used to complete the curing, nitrification, hydrogenation, alkylation, polymerization, condensation and other process.
The stainless steel reaction tank is one of the reaction equipment commonly used in medicine, chemical industry, etc. It is a kind of equipment that mixes two kinds (or more kinds) of liquid and solid of certain volume and promotes their chemical reaction by using the mixer under certain temperature and pressure. It is often accompanied by heat effect. The heat exchanger is used to input the heat required or move the heat produced out. The mixing forms include multi-purpose anchor type or frame type, so as to ensure even mixing of materials within a short period of time.
DOVMXtech Stainless Steel Reactor:
Selling point
-
For many years of production technology and experience, reduces the cost, and is simple and practical. a large number of installation cases, high quality and reasonable price;
- The equipment is scientific in design, safe and reliable, stable in operation, simple in operation, and Complete modular design delivery, No field installation is required;
-
DOVMXtech brand is well-known worldwide;
-
We are a well-known OEM supplier of laboratory equipment in the United States and Canada;
-
Equipment can be customized according to customer requirements;
-
We can provide door-to-door transportation services, worry-free delivery, including customs clearance;
-
Recruit distributor partners globally. We have a very mature pricing system for distributors, fully guaranteeing the interests of distributors.
DOVMXTECH SS316 Stainless Steel Reactor Features
- Dual jacketed design, a liquid jacket for heat transfer fluid, then a jacket of insulation. Sealed outer insulation jacket provides best temperature performance inside chamber
- All wetted parts on main vessel and lid built with pharmaceutical grade 316L SST
- Shell and tube heat exchanger with 70 tubes for the best condensing results
- Electro Polished internal chamber
- Greatly reduces surface roughness by leveling micro-peaks and valleys
- Improved vacuum pressures, out-gassing rates, and pumping speed
- Prolong equipment lifespan by reducing friction and wear
- Much better sterilized and semiconductor grade surface
- Essential for the food and pharmaceutical industries
- Detachable condenser and collection tanks
- Dual collection tanks with big sight glass allows you to drain without breaking vacuum
- High drain port clearance for easy draining or added filtration
- Large ports (top 12" bottom 6") allows easy chamber cleaning
- Top placed vacuum port on condenser provides better flow and condensing results
- No messy cable, with space saving integrated stirring motor controller
- Heavy-duty stainless-steel frame with swivel casters
- Built-in flashlight gives you a clear view inside the chamber
- Positive/negative pressure gauge
- Matte finish stainless steel
- Customizable lid for various application
- Tons of tri clamps adapters available, e.g. tri clamp to hose barb/KF25/NPT
- Choice of bolted or pin clamp for various pressure applications
- Flexible bellow condenser connection reduces shipping damage
- Electric motor and controller model is ETL CE certified to UL and CSA standards
- Pneumatic motor and controller are approved to be used with Acetone, Ethanol, Heptane, Hexane, Isopropyl Alcohol, Methanol, and Pentane.
CAUTION!
- Never fill circulated heaters or chillers with water, always use manufacturer's recommended thermal fluid
- Always leave ample fluid space in heater reservoir to allow fluid heat expansion
- Always keep system vacuum passage or drain valve open when heating up circulation jackets
- Always make sure your vacuum pumps and diffusion pump fluid is clean and within limits
Shell and Tube Heat Exchanger
Standard Quick-Change 316L Stainless Steel Propeller Agitator
SPECIFICATIONS
Model |
DOVMXtech-SR50/SR100 |
Electric stirring motor |
220V, 50/60Hz, 1~Phase, 120/200 watts, 1/4 HP Rotation: 450 rpm max. (±8%) Starting torque: 3.0 N.m Rated toruqe: 1.54 N.m Built-in gearbox ratio: 3:1 to 180:1 Controller: Delta, UL listed |
Pneumatic stirring motor | - Power: 1/4 HP - Rotation: 450 rpm max. (±8%) - Compressed air pressure range: 30 to 80 psi (0.2 to 0.55 MPa) - Working temperature: -10C to +70C - For constant use: set rpm to 80% of maximum rpm - Motor lubricant
- Do not run motor un-loaded - Set Air Adjuster to minimum at initial run, make sure motor is working properly, before increasing CFM - Before inspecting unit, stop the motor and detach air supply. Do NOT inspect unit when motor is in action. - Make sure exhaust port/hole is clear from any debris or blockage - Check every 2-3 days: Air Lubricant, Air Filter water drain |
Port configuration |
Lid: 6" tri-clamp |
Main vessel |
Volume: 50L 100L Material: 316L grade stainless steel Interior finish: Electro Polished |
Agitator | Structure: propeller, 3-blade, dual-layer (standard) Style: quick-change Material: 316L grade stainless steel Detachable length: 20 inches |
Center fluid jacket | Volume: 22L Material: 304 grade stainless steel |
Outer insulation jacket | Sealed Material: 304 grade stainless steel |
Collection tank | Option 1: 10L x 2, 316L stainless steel, with manifold Option 2: 50L x 1, 304 stainless steel, with dolly (15.5" diameter, 23.5" height, 30" with dolly) Option 3: 100L x 1, 304 stainless steel, with dolly (15.5" diameter, 43" height, 49.5" with dolly) |
Material |
All wetted parts 316L grade stainless steel on main reactor body Rest of reactor in 304 grade stainless steel, including motor coupling, triclamps, temp/pressure gauge adapters, and chassis. |
Main Condenser |
Style: shell and tube heat exchanger Number of tubes: 70 Condensing area: 0.89 m2 |
Pressure |
Ultimate vacuum level: 1 Torr |
Temperature range |
-55°C to +250°C (-67°F to +482°F) |
Temperature sensor/display |
Regular: BOOST.TTA.0101, -200C to 480C, 50.5 clamp Explosion proof: BOOST.TTA.0102, -200C to 480C, 50.5 clamp |
Sealing gasket |
Food grade Viton |
Main Mounting Frame | Heavy duty 2 x 2" 304 grade stainless steel, mounted on four casters |
Drain port ground clearance | Drain port: 19.5 inches Drain valve: 13 inches |
Shipping Weight (Unit) |
255 Lbs / 350 Lbs |
Shipping Dimensions |
Full assembly - 39x29x80 (WxDxH) |
We're sorry if we didn't respond in time.
Each equipment will undergo many strict inspections before delivery and transportation to ensure that it is intact. All electrical parts are warranted for one year (except for vacuum pumps and glassware). We have provided double copies for easily damaged items. Please rest assured that the whole machine will be maintained for life. if something breaks, replacement parts will be shipped next day by air.
------